Magura HS33 User Manual Page 1

WORKSHOP 2011 THE PASSION PEOPLEwww.magura.comDeutschEnglishFrancaisNederlandsItalianoEspañol

THE PASSION PEOPLE10 If you are the proud owner of a MAGURA suspension fork with FIRM-tech equipment, mounting the brakes is a breeze. Fit the fork a

Español Italiano Nederlands Français English Deutsch11 1. 1Unsrew TPA fully as shown. 2 If your frame is not equipped for routin

THE PASSION PEOPLE 6 Put the hose on on a hard surface and cut the end with the mounted M8 barbed fi tting squarely with a sharp knife. The barbed fi t

Español Italiano Nederlands Français English Deutsch 1. brake pad wear adjustment HS 33 Turn the red Turbo Pad Adjuster (TPA) in “

THE PASSION PEOPLE10. Filling and bleeding14 The filling and bleeding of a MAGURA brake is not a routine work. This is due to the fact that the MAGUR

Español Italiano Nederlands Français English Deutsch 7. Remove the EBT plug (EBT stands for Easy bleed technology) by using a 2.5

THE PASSION PEOPLE MAGURA offers four different brake pad compounds for different riding styles and rim surfaces. black (0321 406) standard brake pa

Español Italiano Nederlands Français English Deutsch12. Accessories17 1. HS 33 covers: The HS 33 brake lever covers are available

THE PASSION PEOPLEwww.magura.com180724 471 HS33, 2 finger, black0724 472 HS33, 2 finger, silver0724 473 HS33, 4 finger, black 0724 474 HS33, 4 fin

Español Italiano Nederlands Français English Deutsch190724 454 black0724 458 XXL black (+15mm)20x 0720 441black 0721 9070724 46010

THE PASSION PEOPLEwww.magura.com1. Introduction 32. Safety instructions before the first ride 43. Safety instructions before every ride 4-54. Trans

THE PASSION PEOPLEwww.magura.com© MAGURA 2010All rights reservedPrinted in Germany0689 726, 07.2010DeutschlandMAGURA Bike Parts GmbH + Co. KGHeinrich-

Español Italiano Nederlands Français English Deutsch1. Welcome to the Passion People! On the fully hydraulic MAGURA rim brake sys

THE PASSION PEOPLE4 1. Always make sure that the quick release skewers of your wheels and seat post are correctly mounted and closed. incorrectly ins

Español Italiano Nederlands Français English Deutsch5loss of braking power. Clean contaminated rims and pads with isopropyl alcool

THE PASSION PEOPLE 1. Tools for mounting (+maintenance)Allen key 2.5, 4* and 5 mm8 mm open end wrenchsharp knife(*delivered with the brake) Please i

Español Italiano Nederlands Français English Deutsch 1. Mount the brake lever onto the handlebar (Tightening torque 4 Nm/34 in. l

THE PASSION PEOPLE8 8. Side view of a correctly installed EVO 2 unit. There is mounted, if at all, only one washer underneath the mounting plate (arr

Español Italiano Nederlands Français English Deutsch9 14. Reach adjust is done ith 2.5mm Allen screw. Turning key clockwise: leve